X
X
X
X
All systems operational · 200 Tbps+ DDoS protection active
Sign Up Sign In 08505574494

What Is a Botnet? Could Your Server Be Part of One?

HomepageArticlesServer SecurityWhat Is a Botnet and Could Your Ser...
What Is a Botnet and Could Your Server Be Part of One?

Long before your server gets attacked, it may already have become part of the attack. That is exactly what a botnet is: an army of thousands of compromised, remotely controlled devices operating without their owners' knowledge. It contains home computers, cameras, routers and — far too often — insufficiently hardened VDS instances. This guide explains what a botnet is, how a server ends up joining one, which symptoms give it away, and how to clean it up so it never happens again.

What Is a Botnet?

The word botnet comes from combining "robot" and "network". It describes a collection of devices infected with malicious software and controlled through a central command structure. Each compromised device is called a bot or a zombie. These machines keep doing their normal jobs: your site loads, your game server runs, your emails go out. Staying unnoticed is the core design goal of a botnet, because a bot that gets noticed gets cleaned and drops out of the network.

What makes botnets dangerous is not the power of individual devices but their sum. A single home router cannot generate meaningful traffic. But when hundreds of thousands of devices point at the same target simultaneously, the result is a capacity no single attacker could ever assemble alone. The vast majority of modern DDoS attacks work on exactly this principle.

How a Botnet Is Built and Operated

1. The infection stage

The attacker first needs to take over devices. Automated scanners handle this: IP blocks across the internet are continuously swept, open ports are identified, and known vulnerabilities or weak passwords are tried. There is no such thing as a server "too small to be interesting" — scans do not pick targets, they walk address ranges. It is entirely normal for a freshly deployed server to receive its first SSH login attempts within minutes.

2. Command and control (C2)

An infected device connects to a command server under the attacker's control and waits for instructions. Older botnets used IRC channels; today it is common to see variants that communicate over HTTPS so the traffic looks like ordinary web browsing, or peer-to-peer designs with no central point at all. This makes detection harder, because outbound traffic looks unremarkable at first glance.

3. Rental and use

Most botnets are not used by their operators directly — they are rented out, sold in hourly or daily packages on underground markets. This means that once your server is compromised, what it will be used for is not decided in advance: it may send spam today and join a DDoS attack tomorrow.

What Are Botnets Used For?

  • DDoS attacks: The best-known use. The bot army floods a single target with simultaneous requests. UDP flood and amplification techniques are typically executed over botnet infrastructure.
  • Spam and phishing: Bulk email is sent from the compromised server's IP. The result: your IP lands on blacklists.
  • Cryptocurrency mining: Your CPU works for the attacker instead of you. This is usually the first symptom anyone notices.
  • Proxying and traffic laundering: Your server becomes an exit point used to hide someone else's criminal activity. Legally, this is the riskiest scenario.
  • Credential stuffing: Leaked password lists are tested against other sites from your IP address.
  • Scanning for new targets: The botnet grows itself; your server starts scanning other servers.

How Does a Server Join a Botnet? The Most Common Entry Points

  1. Weak or reused root passwords. Brute-force attempts arrive thousands of times a day; a short password gets cracked sooner or later.
  2. An outdated application layer. An old WordPress plugin, an unpatched control panel, or a PHP version nobody has touched in years is the most frequently used door.
  3. Management services exposed to the internet. Databases, Redis, the Docker API or backup services left reachable without authentication.
  4. Scripts downloaded from untrusted sources. On game servers in particular, ready-made scripts and mods pulled from forums are a serious risk.
  5. Poorly configured file permissions. Writable upload directories that allow a web shell to be dropped in.
  6. Shared and forgotten access. An SSH key given to someone who once helped you and never revoked afterwards.

Signs That Your Server Is Part of a Botnet

Botnet software tries to hide, but it cannot operate without leaving traces. Watch for these:

  • Unexplained CPU usage. Sustained high load, especially overnight, when you are running nothing. An unfamiliar, randomly named process in top.
  • An abnormal rise in outbound traffic. Your server normally receives requests. Consistently high outbound traffic means mining, attack participation, or spam.
  • Your emails stop being delivered. Your IP appearing on spam blacklists is a strong indicator that bulk mail is leaving your server.
  • Abuse notices from your provider. Never ignore these; they are usually the first concrete evidence coming from the outside world.
  • Scheduled tasks you did not create. Lines in crontab -l that you never added are the most common persistence mechanism.
  • Unknown user accounts or new SSH keys. Check /etc/passwd and ~/.ssh/authorized_keys.
  • Changed outbound connections. ss -tupn reveals persistent connections to IP addresses you do not recognise.

What to Do If You Suspect a Compromise

Work through this in order — do not start deleting things in a panic:

  1. Isolate the server from the network. Cut traffic if you can, or at least restrict outbound connections. A service outage is better than continuing to spread.
  2. Investigate before destroying evidence. Record the process list, open connections, cron entries and recently modified files. If you do not learn how it got in, the same door stays open.
  3. Rotate every credential. Root password, panel passwords, database users, API keys and SSH keys. Treat all of them as compromised.
  4. Rebuild from scratch. "Cleaning" a compromised system is not reliable; rootkits can fool the very tools you would use to detect them. The correct approach is a fresh install plus data restored from a verified backup.
  5. Check the backup before restoring. Backups taken after the infection date may contain the malware too.
  6. Harden after installation. Complete the basic security steps before the new server goes back into production.

Lasting Protection Against Botnets

Most of the protection comes from disciplined fundamentals rather than exotic tooling:

  • Disable password login for SSH, switch to key-based authentication, and change the default port.
  • Build the firewall on a "everything closed, only what is needed open" model. Consider restricting outbound traffic as well.
  • Enable automatic security updates, and keep the application layer (CMS, plugins, themes) patched.
  • Run a blocking tool against brute-force attempts.
  • Never expose management services directly to the internet; use a VPN or IP allow-listing.
  • Set up monitoring: threshold alerts on CPU, outbound traffic and disk usage are the cheapest early warning system available.
  • Keep backups off the server itself, and test restoring them.

For a detailed, actionable version of these steps, see our guide on server security for a new VDS setup.

The Role of Your Hosting Infrastructure

Part of server security is your responsibility, part of it belongs to the provider. A DDoS-protected network layer both filters incoming attacks and makes abnormal outbound traffic easier to spot. A local point of presence matters too, for latency and for response speed: being in the same time zone as support when something goes wrong saves hours.

At Nubitro, services run in the Istanbul location on AMD Ryzen 9 9950X processors with DDR5 RAM and NVMe M2 SSD storage, on a DDoS-protected network. You can review current configurations on the Turkey location VDS/VPS page, or look at dedicated servers for workloads that need isolated hardware. For game projects specifically, see the MTA server options.

Frequently Asked Questions

Does being part of a botnet make me legally responsible?

As the owner and administrator of the server, you are held accountable for the traffic leaving your IP address. Lack of intent is a mitigating factor, but your provider may still suspend the service or you may receive a formal notice. This is why responding quickly to abuse reports matters.

Is installing antivirus enough?

No. On the server side, most malware is compiled in ways signature-based scanning will miss, or it runs using legitimate system tools. Antivirus is a useful layer, but it does not replace configuration hardening, patch discipline and monitoring.

Can I recover a compromised server without reinstalling?

Technically possible, practically not recommended. You cannot know with certainty which persistence mechanisms the attacker left behind. Cleanup may be worth attempting on a non-critical system; on anything holding data or customers, a fresh install is the only safe path.

Do Windows servers join botnets too?

Yes. The operating system is not the deciding factor — configuration and patch level are. On Windows, leaving RDP exposed to the internet with default settings is the most common entry point.

Why are game servers targeted more often?

Two reasons: third-party scripts and mods are loaded without review, and game servers are high-bandwidth machines that stay online continuously, which makes them valuable to an attacker. Verifying the source of a third-party script before installing it eliminates most of this risk class.

How do I quickly check whether my server has joined a botnet?

Start with three commands: top for unexpected CPU consumption, ss -tupn for outbound connections you do not recognise, and crontab -l plus /etc/cron.d for scheduled tasks you never added. On top of that, check your IP against a blacklist lookup service.

Summary

A botnet is a network of compromised devices that becomes rentable attack capacity. Your server can join one because of a weak password, an unpatched application, an exposed management service, or an untrusted script. The symptoms are usually unexplained CPU usage, rising outbound traffic, a blacklisted IP, and cron jobs you did not create. If you suspect a compromise, the correct order is: isolate, investigate, rotate credentials, rebuild, restore from a verified backup. On the prevention side, key-based SSH, a strict firewall, regular updates, monitoring and off-server backups are the five fundamentals.

If you want infrastructure designed with security as a priority, share your current configuration with our support team, or start by reviewing the Turkey location VDS options.

Powered by WISECP
💬
Top